Grout is a porous substance that is subject to staining by dirty mop water, spillage and other contaminants. The Grout Buster system of cleaning and sealing protects the grout from staining. Sealing reduces the labor of cleaning and maintaining the grout. In a new tile installation the grout should be allowed to cure for at least 3 weeks prior to a sealant being applied. This system will provide the commercial establishment the maximum benefits of beauty and durability.
By applying the Grout Buster system sealant 3 weeks after the initial installation, the establishment will realize the most savings. There are no preparation charges, i.e., cleaning and preparing grout joints for the sealant. There is less ‘down time’ involved for the commercial establishment. Comes with a 5 year written guarantee.
Our Tile & Grout Cleaning Services Include:
- Tile Cleaning
- Tile Sealing
- Grout Cleaning
- Grout Sealing
- Grout Recoloring
- Caulking Services
A color-pigmented water born epoxy grout sealant chemically engineered to penetrate and form a high strength bond to non-sanded, sanded, and epoxy tile grout that will last for years. Our color palate is available in 44 standard color choices. We also have the means to color match all of the industry leading grout manufacturers color offerings. These manufacturers include Custom Building Products, Laticrete, TEC, Bonsal, Mapei. The sealant has been tested and approved by the Ceramic Tile Institute of America.
Slips and falls are one of the world’s leading causes of accidents and injuries resulting in many thousands of people being injured and killed every year. Public places with thoroughfares, stairways, stone or tile foyers, and shopping malls, as well as wet environments, such as tiled laundry rooms, kitchens, bathrooms, balconies, patios, and pool surrounds are always potentially hazardous areas.
Here at Grout Busters we install the industry’s leading product Slip Guard™ from Slip Guard Systems Inc. to insure our customers are receiving the absolute best protection available by creating an anti-slip surface.
Getting your tile floors cleaned and sealed can make them look better than new, and will stay that way, too, if it’s done right!
A high quality finished product requires a couple of steps that have to be followed properly, and the process should only have to be done every 5-10 years. You need to know what you are doing with these steps, or you will get poor results and the seal will not last!
Some of our competitors recommend using steam to clean your grout. The tile and stone association of america reports that steam can be far too aggressive and can cause damage. The chemicals used are too strong and can extract color pigments from the grout which will modify its color.
Please be aware that there are companies that will skip really important, necessary steps! You the customer, will not know because they are not going to tell you. We do jobs all the time for people who tells us “The job looked good when they finished, but it sure did not last long.” Everyone wants a good deal, right? When it comes to a job such as this, some people go with the company that charges the least. I tell people, “A good job is not cheap, and a cheap job is not good!” Usually, the company that is so cheap in price is going to be cheap in its quality of work!